Guide · Businesses · 4 min read · Updated 17 November 2026
How Much Does Generator Transport Cost in the UK?
Short answer
Generator transport in the UK costs £120–£280 locally for a portable set up to 60kVA, £350–£700 for a 60–200kVA canopied set moved by HIAB and £600–£1,200 for 200–500kVA sets. Containerised generators start from £900 for haulage, mobile crane lifts cost £600–£1,800 and plant room rigging and skating starts from £1,500 after a survey.
Typical generator transport prices in 2026
Generator moves are priced on the weight and footprint of the set, the lifting method and the distance. A towable or portable set on a tail-lift lorry is a short job with one driver. A large canopied set needs a HIAB with enough capacity at the reach required, and a containerised set or a plant room installation brings in cranes, lift plans and rigging teams.
The table shows guide prices for 2026. We give one fixed price once we know the make, model and kVA rating, the weight from the data plate or spec sheet, and photos of both the collection and the drop point.
| Job | Guide price | Typical method |
|---|---|---|
| Portable generator up to 60kVA, local | £120–£280 | Tail-lift van or lorry |
| Canopied set 60–200kVA | £350–£700 | Rigid HIAB lorry |
| Canopied set 200–500kVA | £600–£1,200 | Larger HIAB or crane-assisted lift |
| Containerised generator haulage | from £900 | Flatbed or step frame; site crane extra |
| Mobile crane lift on site | £600–£1,800 | Crane size, reach and duration |
| Plant room rigging and skating | from £1,500 | Quoted after survey |
Weight, reach and the lifting method
The single biggest cost driver is how the generator gets from the vehicle to its final position. A HIAB crane mounted on the lorry is economical, but its lifting capacity falls sharply as the boom extends. A 4-tonne canopied set that can be lifted easily right beside the lorry may be beyond the same crane if it has to land six metres away behind a fence.
When the reach is too great for a lorry-mounted crane, a separate mobile crane is needed, and that adds a second vehicle, an operator and usually a lift supervisor. Telling us exactly where the set must go, with measurements from where a lorry can park, is the best way to get an accurate price first time.
- Weight of the set, including any fuel in the base tank
- Distance from the lorry's parking point to the final position
- Obstacles such as walls, fences, canopies and overhead cables
- Ground conditions where the lorry and outriggers will sit
- Whether an old set has to be removed at the same time
Other things that affect the price
Timing matters. Emergency deliveries to a site that has lost power, night-time swaps in hospitals or data centres and weekend work all cost more than a booked weekday delivery. Hire companies moving sets between depots often get keener prices because the routes are regular and planned.
Site conditions can add costs that are easy to miss. Soft ground may need trackway or ground mats under the outriggers. A lift over a public pavement may need a licence from the council and barriers. A lift near overhead lines needs extra planning and sometimes the network operator's involvement. We flag these at the quoting stage rather than on the day.
Containerised and large sets
Sets above roughly 500kVA are usually built into acoustic containers, often in 20ft or 40ft ISO sizes. These travel on flatbeds or step frame trailers and are offloaded by a mobile crane sized for the weight and the radius. Haulage starts from £900, with the crane priced separately depending on the size needed.
Very large sets may exceed normal weight or dimension limits once on the trailer, which brings in abnormal load notice and route planning. For these, allow more lead time and expect a site visit before a firm price is given.
Containerised sets also need a suitable landing area. The container's corner castings or base frame must sit on a level plinth or sleepers, and the crane needs a clear radius to swing the load in. On busy industrial sites, plan the lift for a time when deliveries and forklift traffic can be paused.
What a fixed quote should include
A clear quote names the vehicle, the lifting method and the crew. It should say who prepares the lift plan, whether slings, spreader beams and shackles are supplied, and how long is allowed on site. It should also say what happens if the drop point is not ready, for example if the plinth has not been poured or the electrician is not available to sign off the position.
Disconnection and reconnection are electrical work and are normally done by your electrician, not the haulage crew. Make sure the timings line up so the set is not left waiting.
Ways to keep the cost down
Book planned moves with as much notice as you can, and group them. A hire company returning several sets from finished sites can often run them on one route. Clear the drop point of vehicles, skips and stored materials before the lorry arrives. Have the plinth or level ground ready and marked. Provide accurate weights, because an under-specified crane means a wasted visit and a second booking.
For permanent installations, ask whether the old generator can leave on the same vehicle that brings the new one. That saves a separate collection and, sometimes, a separate crane day.
If you move sets often, for example as a hire company or an events supplier, a regular arrangement with agreed rates for each size band makes budgeting easier. Share your typical sets, depots and site types, and we can price routine moves in advance so each booking is quick.
Questions people also ask
How much does it cost to deliver a hire generator?
A portable hire generator up to 60kVA usually costs £120–£280 to deliver locally on a tail-lift vehicle. A canopied set of 60–200kVA delivered and placed by HIAB is typically £350–£700. Distance, reach to the drop point and out-of-hours timing make the biggest differences to the fixed price.
Is crane hire included in generator transport prices?
For portable and most canopied sets, the lorry's own HIAB does the lifting and is included. For containerised sets or long reaches, a separate mobile crane is needed and is priced on top, usually £600–£1,800 depending on crane size, radius and how long it is on site.
Why does the distance from the lorry to the drop point matter so much?
Crane capacity drops quickly as the boom extends. A set that is easy to lift close to the lorry may be too heavy at a longer reach. If the drop point is far from where the lorry can park, a bigger crane or a different lifting method is needed, which costs more.
Written and checked by the Generator Transport team. Read our editorial policy.
More guides
HIAB or Mobile Crane for a Generator Lift? A Plain Guide
A HIAB lorry is usually enough for portable and canopied generators up to around 200–500kVA when the drop point is close to where the lorry can park.…
Preparing Your Site for a Generator Delivery: Checklist
Before a generator delivery, confirm the lorry can reach a firm, level parking spot close to the drop point, clear the landing area, check for…
Standby Generator Installation Moves: What Happens
A standby generator installation move starts with a site survey and a lift and rigging plan. The old set is disconnected by an electrician, drained…
Transporting Generators: Fuel, Load Securing and Safety Rules
When generators are moved by road, diesel in the base tank is a dangerous good under ADR, so fuel levels and tank security must be managed. Sets must…
Get a free generator transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote