Generator Transport

Generator Transport

Standby Generator Installation Moves

Positioning standby generators into plant rooms, basements, rooftops and compounds using skates, jacks, gantries and cranes.

Free Generator Transport quote

No obligation. We only use your details to reply about this job.

Standby Generator Installation Moves — Generator Transport

What's involved

Permanent standby generators for hospitals, data centres, offices and care homes rarely sit where a lorry can reach. Rigging crews use toe jacks to raise the skid, then heavy-duty skates or air skates to move it along prepared routes, with steel plates bridging thresholds. Gantries and chain hoists lower sets through hatches into basements, while mobile cranes lift units onto roofs or into enclosed compounds. Floors and roofs along the route need to be confirmed as strong enough by a structural engineer. The rigging team works to a method statement and lift plan, coordinating with the electrical contractor who will connect the set. Removing the old generator is often part of the job. Have dimensions of doors, corridors and hatches ready, and check whether the generator's canopy or radiator can be removed to reduce the size.

How we handle it

  1. Send generator details

    Give us the make, kVA rating, weight and dimensions of each generator, whether it is canopied, skid-mounted or containerised, plus collection and delivery locations and dates.

  2. Plan vehicle and lift

    We match the generator to a suitable vehicle and lifting method, whether tail lift, HIAB, mobile crane or skates. Access, ground conditions and overhead hazards are checked.

  3. Quote and confirm

    You receive a written price covering transport, lifting, crew and any lift plan or survey needed. Out-of-hours and emergency deliveries can be arranged where available.

  4. Collection and transport

    The generator is lifted by its designated lifting points, secured with chains or twist locks and transported with fuel caps tight and isolators off.

  5. Positioning on site

    The set is placed on level ground, a bund or plinth where you want it, with clearance for airflow and access. Your electrician then connects and commissions it.

Price guide

Generator transport prices depend on the generator's weight and size, the vehicle and lifting method needed and the distance. A small portable set on a tail-lift van is quick. Containerised sets and plant room installations involve cranes, rigging teams and planning, which costs more.

  • Mobile crane lift on site: £600–£1,800. Depends on crane size, reach and duration; includes lift planning.
  • Containerised generator transport: from £900. Flatbed or step frame haulage; crane hire at site is extra.
  • Canopied generator 200–500kVA with HIAB: £600–£1,200. Larger HIAB or crane-assisted lift depending on weight and reach.

Questions about standby generator installation moves

How much does it cost to transport a generator?

Transporting a portable generator locally usually costs £120 to £280. Canopied generators of 60 to 200kVA cost around £350 to £700 with a HIAB lift, and larger sets £600 to £1,200. Containerised generators start from around £900 for haulage, plus crane hire at site.

How heavy is a generator?

Generator weight depends on output and construction. A 20kVA canopied set weighs around 600 to 900kg, a 100kVA set roughly 1.5 to 2.5 tonnes, and a 500kVA set five tonnes or more. Containerised megawatt sets can weigh over 20 tonnes. Check the manufacturer's data plate or spec sheet for the exact figure.

What is a HIAB and why is it used for generators?

A HIAB is a lorry-mounted crane that lets the driver lift a load on and off the vehicle without separate lifting equipment. It is ideal for canopied generators because it can place the set exactly where needed, within the crane's reach. The term comes from a brand name but is used for this type of crane generally.

Get a free generator transport quote

Tell us what you need and we'll come back with a clear price.

Request a quote